[TT-1100USB] - FAQ

How do I change the belt on the TT-1100USB?

Remove the slipmat and platter, and put the belt around the large circle on the underside of the platter. Place the platter back on the turntable and use the access holes on the top of the platter to put the belt around the motor spindoe. 

How do I access the 78 rpm speed on the TT-100USB?

Press the 33 rpm and 45 rpm buttons at the same time. 

How do I connect my TT-1100USB to a computer?

This turntable has a built-in class compliant audio interface so no driver installation is necessary. Simply connect a USB cable from the back of the turntable to your computer and the TT-100USB will show up as an audio device that you can use with any standard recording software.

How can I connect the TT-1100USB to a device that doesn’t have a phono input?

In the output section on the back of the TT-100USB there is a phono/line switch. Set the switch to line and the turntable will output a line level signal.

 

Further Technical Support

Whether you are a customer or dealer, if you already own a Gemini product, or if you just have pre-sales questions, the Gemini technical support team is available to help! Visit the link below to connect with any of the following support options: phone support, email support. 

www.geminisound.com/support