[PMX-10][PMX-20] DVS controls for Virtual DJ

Please note: VirtualDJ will only work with their specific timecodes:
VirtualDJ Timecode Vinyl
VirtualDJ Timecode CD/MP3

PMX-10

  • Connect Timecode players to Channels 1 & 2
  • Connect the PMX-10 to a computer via USB
  • Power on the PMX-10
  • Launch Virtual DJ
  • When prompted select “PMX-10” and click “OK”
  • Open Virtual DJ preferences
  • Confirm that the following settings are selected
    • OUTPUTS = Separate Decks
    • HARDWARE = Gemini PMX-10
    • INPUTS = Timecode Signal
      • CLICK APPLY
    • Load timecode disc/mp3/vinyl to players.
    • Once tracks are loaded into Decks 1 or 2 in Virtual DJ you will be able to control playback via timecode players.

PMX-20

PLEASE NOTE: Headphone Cueing is not available when using DVS mode with the PMX-20

  • Connect Timecode players (turntables with timecode vinyl or media player with timecode mp3 etc) to Channels 1 & 2
  • Connect the PMX-20 to your computer via USB
  • Power on PMX-20 and timecode players
  • To enter DVS mode on mixer hold the Channel 1 USB button down until it flashes (10+ seconds)
  • Launch Virtual DJ
  • When prompted select “PMX20 DVS” and click “OK”
  • Open Virtual DJ preferences
  • Confirm that the following settings are selected
    • OUTPUTS = Separate Decks
    • HARDWARE = Gemini PMX-20
    • INPUTS = Timecode Signal
      • CLICK APPLY and close preferences window
    • Load timecode disc/mp3/vinyl to players.
    • Once tracks are loaded into Decks 1 or 2 in Virtual DJ you will be able to control playback via timecode players.

Further Technical Support

Whether you are a customer or dealer, if you already own a Gemini product, or if you just have pre-sales questions, the Gemini technical support team is available to help! Visit the link below to connect with any of the following support options: phone support, email support. 

www.geminisound.com/support